Impact of Auxiliary Features on Retention of Short Dental Crowns: An In-Vitro Analysis of Box and Groove Preparations.

BACKGROUND Several auxiliary features have been proposed to achieve sustainable retention for short-prepared dental crowns; however, achieving retention is challenging. This study aimed to assess the impact of increased total occlusal convergence and auxiliary preparation factors like box and groove on the retention form of short tooth preparations. MATERIAL AND METHODS Eighty resin machine-milled dies with a height of 3 mm and a deep chamfer margin of 1 mm were prepared to mimic the short-prepared molar. Initially, 2 teeth were prepared following the guidelines, and the total occlusal convergence was kept at 10° and 20°, respectively. Auxiliary features such as the proximal box and buccal groove were prepared on separate 20° dies. Eighty dies were prepared with 10 samples each for 10°, 20°, 20° with proximal box and 20° with buccal groove for zirconia (n=40) and metal crowns (n=40). Cementation was done with glass ionomer luting cement, and a pull-off test was conducted. Data were analyzed using one-way analysis of variance and post hoc fisher least significant difference test (P<0.05). RESULTS The highest mean was observed in the proximal box group with the metal crown (14.59), and the lowest in the group with 20° zirconia crowns (9.12). Within groups, the highest retentive values were found for the 20° taper with proximal box preparation; the lowest was for the 20° taper group. CONCLUSIONS Within the study limitations, it could be concluded that incorporating a proximal box or buccal groove in short tooth preparations with an increased total occlusal convergence improved retentive values.

Comparative Accuracy of Intraoral and Extraoral Digital Workflows for Short Span Implant Supported Fixed Partial Denture Fabrication: An In Vitro Study.

BACKGROUND The advent of digital impressions using computer-aided design and manufacturing technology (CAD/CAM) has simplified and improved the fabrication of implant prostheses in dentistry. The conventional impression has several drawbacks, including tray selection, material type, impression technique, impression disinfection, and cast model storage. The inaccuracies caused by distortion and contraction of impression material can be minimized with digital impressions. This study aimed to compare digital dental impressions of 10 working casts made using the Pindex laser removable die system to fabricate parallel drill channels vs 10 working casts made using the Di-Lok plastic tray removable die system. MATERIAL AND METHODS An implant master die with 2 dental implant analogs was fabricated. Ten working casts using the Pindex laser removable die system with parallel drill channels and 10 working casts using the Di-Lok plastic tray removable die system were fabricated. The working casts were scanned using an extra-oral laboratory scanner and the implant master model was scanned with an intra-oral scanner. RESULTS The properties of the casts made using the 2 systems were evaluated and analyzed with ANOVA and post hoc Tukey test. The mean horizontal linear distances between A1B1 (P<0.021), A2B2 (P<0.018), C1D1 (P<0.026), C2D2 (P<0.03), B1C1 (P<0.01), and mean vertical distances between B1A2 (P<0.015), C1D2 (P<0.001), B1B2 (P<0.028), and C1C2 (P<0.001) were significantly different between the Pindex system and Di-Lok tray system as compared to intra-oral scans. CONCLUSIONS Complete digital workflow with intra-oral scans were more than the partial digital workflow with extra-oral scans for the Pindex system and Di-Lok tray systems.

Rehabilitation of Ectodermal Dysplasia Using CAD/CAM Mandibular Complete Denture and Maxillary Overdenture: A Clinical Report.

Ectodermal dysplasia is a genetic disorder characterized by the abnormal development of two or more ectodermally driven structures, leading to various clinical manifestations such as sparse hair, dry skin, and hypodontia or anodontia. The absence of teeth significantly impacts the quality of life for individuals affected by this condition. This article presents a clinical case report of a patient with ectodermal dysplasia who underwent full mouth rehabilitation using computer-aided design/computer-aided manufacturing (CAD/CAM) technology to fabricate a mandibular complete denture and a maxillary overdenture.

A novel digital workflow for fabricating artificial periodontal ligament using three-dimensional printing flexible resin: A dental technique.

The fabrication of periodontal ligament (PDL) models for in vitro dental studies has seen a wide range of techniques and materials being utilized. This paper introduces a novel dental technique that employs a digital workflow for the fabrication of artificial PDL using three-dimensional printing of flexible resin. This innovative approach offers several advantages, including enhanced accuracy and realism in simulating PDL. The digital workflow facilitates a streamlined fabrication process, ensuring efficiency and precision. By presenting this novel technique, this digital approach contributes to the advancement of in vitro dental research, providing researchers with a reliable and realistic model for studying various dental phenomena.

Patient Perceptions and Satisfaction With Virtual Clinics During the COVID-19 Pandemic: A Cross-Sectional Study.

Background Virtual clinics played an important role for many patients during the COVID-19 pandemic. We conducted this cross-sectional study to evaluate patient perceptions and their satisfaction with virtual clinics during and after COVID-19 in Saudi Arabia. Methods An online questionnaire-based survey with questions in both Arabic and English was conducted among patients who attended outpatient clinics at King Faisal Specialist Hospital and Research Center, Riyadh, Saudi Arabia from May 2021 to September 2021. Demographic variables, the clinic type, and the level of satisfaction with the remote appointments were recorded. Descriptive statistics and logistic regression analysis were used to analyze the data.  Results A total of 1274 participants filled out the survey. Of them, 831 (65.23%) were females, and 749 (58.79%) were aged 18 to 30 years old. Of the sample studied, 411 (32.26%) had appointments with their healthcare provider remotely since the beginning of the pandemic; 311 (75.67%) were satisfied or highly satisfied with the remote appointments; and 198 (48.18%) participants desired to continue using virtual services post-COVID-19 pandemic. Logistic regression analysis showed that females were more satisfied with virtual clinics than males (OR= 1.18, 95% CI (1.01, 1.40), p=0.04). The age group of 18 to 30 was more satisfied than other age groups (OR= 53.23, 95% CI (2.01, 1347.18), p=0.02). Conclusion The majority of the participants who used virtual clinics were satisfied with the service. Nearly half of the participants wanted to continue using virtual services even after the COVID-19 pandemic was over. More effort should be made to increase patient awareness and knowledge about virtual clinics.

Digital workflow for duplication of gold onlay anatomy to monolithic zirconia onlay for a complete denture: A technique paper.

Digital replication of an existing cast gold onlay anatomy to a more esthetic material for a new complete denture is challenging. A technique is presented that uses digital technology to fabricate a new maxillary complete denture with monolithic zirconia onlays that duplicate the anatomy of an existing complete denture with cast gold onlays.

Digital beading for a CAD-CAM framework for an implant-supported overdenture: A dental technique.

The analog technique of making bead lines for a metal superstructure framework for the maxillary implant-supported overdenture is created by scribing shallow grooves on the surface of a definitive gypsum cast. This report describes a digital technique that uses computer-aided design and computer-aided manufacturing technology to make dental bead lines on an intraoral impression without using the gypsum cast.

Knowledge, Attitudes, and Practices of the Population in Jazan Region, Saudi Arabia Regarding Dengue Fever and Its Prevention Measures: A Community-Based Cross-Sectional Study.

In previous studies, there was an apparent lack of health education about dengue fever (DF) among the Saudi population. Therefore, we conducted this study to assess the knowledge, attitude, and practices (KAP) about dengue fever among the Jazan region population, which is one of the most prevalent diseases in the region in Saudi Arabia (KSA). This was a cross-sectional and community-based study. The adult population was divided into governorates according to the regions that were close to each other, and then a convenient stratum was selected from each region. Next, random sampling was applied. Data were collected using a self-administered questionnaire. Exclusion criteria were young people (<18 years old) and health workers. Data analysis was performed using descriptive statistics, the Pearson's correlation coefficient, and multiple linear regression. Of the 392 participants in this cross-sectional study, 59.18% were male, 76.28% were aged 18-35 years, 72.96% had a university degree, and 63% had a monthly income of less than SAR 5000 (USD1 = 3.76). The scores (mean ± SD) for KAP regarding DF among the responders were 22.77 ± 7.9, 22.68 ± 7.24, and 25.62 ± 9.4, respectively. KAP constructs were positively correlated according to the Pearson's coefficient. In multiple linear regression analysis, males were favorably and substantially linked with attitude score (ß = 2.76, p = 0.001) and negatively associated with practice score (ß = -2.45, p = 0.023). No-degree participants scored lower on knowledge (ß = -2.78, p = 0.003). There is potential for more research in Saudi Arabia to increase the generalizability to reduce the impact of dengue epidemics.

Evaluating the effect of the protector cap for castable implant abutments on reverse tightening values.

STATEMENT OF PROBLEM: Screw loosening is the most common mechanical complication with implant prostheses. How the alteration of implant-to-abutment connection surfaces that occurs during laboratory procedures affects screw loosening is unclear. PURPOSE: The purpose of this in vitro study was to compare the reverse tightening value (RTV) differences between custom castable abutments before casting, after casting in a conventional manner, and after casting with custom protector caps and pegs. MATERIAL AND METHODS: Thirty implants with a standard-diameter conical connection (NobelReplace Conical Connection 4.3×13 mm; Nobel Biocare AG) and 30 premachined 4.3-mm GoldAdapt abutments (GoldAdapt; Nobel Biocare AG) were selected for this study. Specimens were divided into 3 groups (n=10): the uncast custom castable abutment group (UCCA) in which abutments were new and not cast; the unprotected custom castable abutment group (UPCCA) in which abutments were cast and devested with airborne-particle abrasion; and the protected custom castable abutment group (PCCA) in which abutments were cast by using protector caps and pegs made by milling zirconia and then devested with airborne-particle abrasion. All abutments in each group were tightened to 35 Ncm with a calibrated digital tightening device. After 10 minutes, all screws were retightened to 35 Ncm. At 3 hours, each screw was loosened, and the value at which the initial loosening occurred was documented as the RTV. The results were statistically analyzed with 1-way ANOVA to explore differences, and post hoc tests with Tukey adjustment were used for multiple comparisons. RESULTS: Among the tested groups, the mean RTV ranged from 19.89 Ncm to 27.19 Ncm: UCCA 27.19 Ncm, UPCCA 19.89 Ncm, and PCCA 24.24 Ncm. A significant difference was found among the tested groups (P<.05). CONCLUSIONS: Casting procedures, especially devestment with airborne-particle abrasion, affected implant-abutment connections and the seat site of the screw. Protecting the implant connection site and the seat site of the abutment screw with protector caps and pegs prevented a significant loss of the RTV.